當前位置

首頁 > 英語閱讀 > 英語閱讀理解 > 探索發現 wifi 啤酒罐也可以有大用處大綱

探索發現 wifi 啤酒罐也可以有大用處大綱

推薦人: 來源: 閱讀: 3.22W 次

Boost Your WiFi Signal Using Only a Beer Can

聽說過用啤酒罐就能增強wifi信號嗎?來讓我們看看怎麼做吧

I love a good hack, especially one that requires me to throw back a cold one before hand (or during). This simple wifi boost has actually been shown to increase signal strength by at least 2 to 4 bars. And, well, I will drink to that.
我喜歡做一些有意思的小玩意兒,特別是那些我能自己動手做出來的。這個簡單的wifi信號強化裝置就是如此。它能增加wifi的強度2-4格。現在我先把啤酒喝乾淨。

These instructions came to us via WikiHow and we think they are most definitely worth checking out. But here is the most important question: what kind of beer will you use?
這些裝置毫無疑問都經得起檢驗,但是最重要的問題是選擇什麼樣的啤酒瓶子?

For this project you are going to need scissors, a utility knife, some adhesive putty and an empty beer can. More than one empty beer can is acceptable but don’t kid yourself, the router only needs the one.
對於這個簡單的裝置,需要剪刀,美工刀,一個空啤酒罐,多了也沒用。

The first step is to wash out your empty beer can, unless of course said beer is a can of Pabst Blue Ribbon. If it is PBR, promptly go drink a better beer. You really should be ashamed of yourself.
第一步是清洗啤酒罐,最好是藍帶啤酒,如果是塑料瓶裝的,趕緊換一個去。

Once the can has dried, you will want to remove it’s pull tab.
啤酒罐幹了之後,去掉拉環。

Only perform this next step if you have not been drinking. Using the utility knife, saw off the bottom of the can. Chances are your can will not have a red dotted line. If you see one, put down the knife…you’ve had too much beer.
用美工刀切掉開口端,剪開罐身,再將底端切割成部分相連的形狀。

It’s the home stretch! You just need to attach your modded beer can to the wifi router. Hopefully no other parts of the can have actually grown back. You now have beer-fi!
現在是最後一步了。只要把你的啤酒罐模型連接到路由器上—如果沒有什麼要修改的,你就擁有了自己的啤酒罐路由器。

padding-bottom: 69.87%;">探索發現 wifi 啤酒罐也可以有大用處
探索發現 wifi 啤酒罐也可以有大用處 第2張
探索發現 wifi 啤酒罐也可以有大用處 第3張
探索發現 wifi 啤酒罐也可以有大用處 第4張
探索發現 wifi 啤酒罐也可以有大用處 第5張
探索發現 wifi 啤酒罐也可以有大用處 第6張